logo Zero Emission Valve Actuators
PATENT PENDING

Eliminating the emission of methane and other volatile organic compounds from gas powered pneumatic devices throughout the oil and gas industry by providing a NEMA 7
explosion proof electric linear actuator
Nichols Given Associatesnga logo
 
   
 A Zero Emission replacement for natural gas powered pneumatic devices currently used to control valves. Eliminate methane and volatile organic compound emissions, remove old expensive technology and prioritize your investment to maximize your ROI and profits. These actuators are designed to control valves in on/off applications and modulating control applications. This product exceeds the recommendations of the Oil and Natural Gas Sector
New Source Performance Standards and National Emission Standards for Hazardous Air Pollutants. CFR : 40 CFR 60 & 40 CFR 63

 
 
    
on off

ON / OFF APPLICATION
On / Off Applications

  • Input Voltage: 12 VDC, 24 VDC, 24 VAC, 115 VAC, 230 VAC
  • Input Voltage Indicator: LED
  • Running Current at max output: 1.4 amps
  • Idle Current: 3 mA
  • Maximum Stall Current: Do Not Exceed 2.5 amps
  • Limit Switches: 2 Auxiliary; SPDT 15A@250VAC
  • Duty Cycle: 100%
  • Maximum Starts per Minute: 30
  • Operating Temperature Range: 32 to 150 degrees F (-40 - 130 F w/ heater)
  • Visual Position Indication: Knob on Cover (not on Q6.2.4)
  • Enclosure: NEMA 4/4X/7&9
  • Power Train Lubrication: Permanent
  • Gears: Hardened Steel Spur
  • Conduits: (2) 3/4" NPT
  • Agency Approval: CSA (Canadian Standards Association)
  • Cover Hardware: Ultra Corrosion-Resistant
  • Manual Override: Wrench-operated Shaft (not on Q6.2.3, Q6.2.4 & Q6.2.4F)
  • 1 Year Warranty



zeroemiso

modulating actuator
MODULATING APPLICATION

Modulating Control Applications

  • 12VDC
    • Cycle Time  -  11 sec. - 30 sec. 
    • Current Draw - 2.2 - 4.3 Amps
  • 24VDC
    • Cycle Time  -  13 sec. - 42 sec.
    • Current Draw - 1.2 - 2.4 Amps 
  • 24VAC
    • Cycle Time  -  8 sec. - 40sec. 
    • Current Draw - 1.8 - 2.4 Amps 
  • 115VAC
    • Cycle Time  -  9 sec. - 42 sec. 
    • Current Draw - 0.4 - 0.8 Amps 
  • 230VAC
    • Cycle Time  -  9 sec. - 43 sec. 
    • Current Draw - 0.4 - 0.6 
***All above Data ranges are dependent on Thrust required to operate the valve

  • Includes all Standard Features as shown for the On/Off actuator above
  • Battery Backup for fail position either CW or CCW upon loss of power or signal and or continued modulation during power outages provided the control signal remains.
  • Proportional control with either 4-20 mA or 0-10 VDC input
  • 2 Standard end-of-travel,  and 2 optional additional SPDT Limit Switches 
  • Selectable Fail position upon loss of power or signal.
  • CSA (C US) Certification
  • 1 year Warranty